Product Details: Frigidaire 137221600 Drain Pump – Genuine OEM Replacement Part for Washing Machines

Overview

Ensure your washing machine drains effectively with the Frigidaire 137221600 Drain Pump, a genuine OEM (Original Equipment Manufacturer) replacement part designed for reliability and performance. This essential component removes water from the wash tub at the end of each cycle, ensuring your clothes are properly drained before the spin cycle for clean, dry laundry. Compatible with Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, and select Sears/Kenmore washing machines (including washer-dryer combos), this drain pump is the perfect solution for restoring your washer’s drainage and circulation functions, particularly for front-load models.

Key Features

• Genuine Frigidaire Part: Manufactured by Frigidaire, ensuring factory-quality fit, durability, and performance.

• Essential Drainage Component: Removes water from the washer tub during the drain cycle, activated after the spin speed is maintained (typically within 8 minutes for front-load models), ensuring dry clothes and optimal cleaning.

• Wide Compatibility: Fits Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, and select Sears/Kenmore washing machines, including front-load washers and washer-dryer combos (e.g., Frigidaire FAFW3801LW3, Electrolux EFLS617SIW, Kenmore 41744052400).

• Reliable Repair: Fixes drainage issues, unusual noises, and water retention, restoring smooth operation and preventing cycle interruptions.

Specifications

• Part Number: 137221600

• Type: Drain Pump (Drain Pump and Motor Assembly for Front-Load Washers and Washer-Dryer Combos)

• Function: Pumps water and soap out of the washer during the drain portion of the cycle, featuring a two-port design (large and small ports) with a flapper to prevent drain backflow.

• Material: Durable plastic housing (white, black, or gray, depending on version) with metal and rubber components, including a motor, impeller, pump housing with filter, drain seal, and flapper.

• Dimensions: Approximately 5-1/4” L x 5-1/8” W x 5-1/2” H (compact design for front-load washers and combos).

• Weight: Approximately 1.5–2 lbs (based on retailer specs and user reports).

• Electrical Specs: 120V, 60 Hz, 1.25A, 85W, Class A, with a run time of 10 minutes ON / 50 minutes OFF (specific to motor operation; verify with your model manual).

Compatibility

The Frigidaire 137221600 Drain Pump is a versatile replacement part suitable for a variety of washing machines and washer-dryer combos across Frigidaire and affiliated brands. It’s an ideal solution for the following:

• Frigidaire Brands: Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, and other Frigidaire-manufactured washers (e.g., models like FAFW3801LW3, FAFW3511KW0, FTF530FS, ATF6700FS1, CWS3600AS1).

• Sears/Kenmore Washers: Compatible with Kenmore models produced by Frigidaire/Electrolux, such as Kenmore Elite 41744052400, 41744052401, 41744052500, 41748102700, and similar front-load units.

Cross-Reference Information

This part number (137221600) replaces the following part numbers, ensuring you can find the right fit for your washer:

• AP5684706

• 131724000

• 134051200

• 134740500

• 137108100

• 137151800

• 137151800KITK

• 2754548

• ER137108100

• PS7783938

• TJ137108100

Verify compatibility with your washer’s model number (found on the back, inside the door, or in the manual). Common compatible models include Frigidaire Affinity, Electrolux Front-Load, Gibson, Kelvinator, Westinghouse, and Kenmore Elite front-load washers from the early 2000s to 2010s (e.g., FAFW3801LW3, EFLS617SIW, 41744052400).

Benefits

• Restores Drainage Performance: Fixes issues like water remaining in the drum, wet clothes, and incomplete cycles, ensuring dry, clean laundry.

• Eliminates Noises and Leaks: Addresses unusual noises (e.g., humming, buzzing) and prevents water pooling or leaks around the base of the machine.

• Resolves Cycle Interruptions: Clears issues like stopping mid-cycle or failing to start (due to sensed water), eliminating drainage-related problems.

• Prevents Further Damage: Replacing a clogged or damaged pump prevents strain on other components, like the motor or tub, extending your washer’s lifespan.

• Cost-Effective: Save on replacement costs by repairing your washer with a genuine OEM part instead of purchasing a new machine.

• Trusted Quality: Backed by Frigidaire’s reputation for reliable, high-performance appliance parts, with a 1-year limited warranty from Frigidaire (verify with retailer).

Common Causes of Drain Pump Failure

Drain pumps can fail due to:

• Blockages from Debris or Small Items: Coins, lint, socks, or other objects clog the impeller, filter, or ports, halting water flow.

• Normal Wear and Tear: Prolonged use (typically 5–7 years) wears down the motor, impeller, or seals, reducing efficiency.

• Mechanical Damage: Burnt-out motor, damaged impeller blades, or worn seals cause leaks, noises, or stoppage.

• Electrical Failures: Faulty wiring or power surges can impair the pump motor, causing it to stop or operate noisily.

Symptoms of a Faulty Drain Pump

• Water Not Draining Completely from the Washer: Water remains in the drum after cycles, leaving clothes wet and triggering errors.

• Unusual Noises, Like Humming or Buzzing, Indicating the Pump is Struggling: Grinding, buzzing, or rattling sounds during drain cycles, signaling a blockage, damage, or motor failure.

• Washer Stopping Mid-Cycle: Cycles halt due to inability to drain, often displaying error codes (e.g., E11, F02, or similar on Frigidaire models).

• Water Pooling Around the Base of the Machine: Leaks from the pump area indicate seal failure or a clogged/damaged pump.

Installation Tips

• Tools Required: Phillips screwdriver, flathead screwdriver, 1/4-inch nut driver, pliers, and possibly a bucket or towel. Always disconnect power before starting repairs.

• Difficulty Level: Moderate—DIY-friendly for those with basic appliance repair experience, but professional help is recommended if unsure.

• Time: Typically 30–60 minutes, depending on washer model and user expertise (e.g., accessing the pump in a front-load washer or combo).

• Steps:
  
  1. Unplug the washer or shut off the house circuit breaker.
  
  
  1. For front-load models (e.g., FAFW3801LW3), tilt the washer back or remove the front panel (3-4 screws) and bottom access panel (2 screws). For combos, access may require removing the dryer section or lower panel.
  
  
  1. Disconnect the drain hose and electrical connectors from the old pump (note wire positions).
  
  
  1. Remove the old 137221600 by unbolting it (2-3 screws) and clearing any debris from the pump housing, filter, or hoses.
  
  
  1. Install the new pump, reconnect hoses (ensure the flapper is included and properly seated to prevent backflow) and wires, and secure with screws.
  
  
  1. Reassemble, plug in, and test—run a drain or rinse cycle to verify no leaks, noises, or error codes.
  
  

• Caution: Wear work gloves to protect hands, as pump components can be sharp. Check and clean the pump filter and drain hose for clogs before replacing—clear debris to prevent recurrence. The redesigned 137221600 may look different (e.g., white or gray housing vs. original black) but functions identically—ensure proper orientation and flapper alignment.

For safety and optimal results, refer to your washer’s service manual or watch online tutorials specific to your model (e.g., PartSelect’s 137221600 video for FAFW3801LW3, available on YouTube).

Recent Reviews and Insights (Online Research)

• Customer Feedback (PartSelect, RepairClinic, Amazon, eBay, Reliable Parts):
  
  • Positive: “Fixed my Frigidaire Affinity—drains perfectly, no noise” (30-min install, PartSelect, 2024).
  
  
  • Common Fixes: Resolves “E11 error,” “wet clothes,” or “humming pump” issues (e.g., FAFW3801LW3, ATF6700FS1).
  
  
  • Concerns: Some users report, “Pump failed after 12–18 months—check filter first” (Amazon, 2023). Others note debris clogs as the root cause, not the pump (RepairClinic, 2024).
  
  
  • Durability: Rated 4–5 stars generally, lasting 2–5+ years with maintenance—OEM outperforms aftermarket versions (e.g., DPD, BlueStars, PRYSM) in longevity.
  
  
  • Tips: “Clean lint filter and hoses before installing—saved me from reordering” (eBay, 2022). Some mention the redesigned white/gray design differs from the original (black), but fit is identical.
  
  

• Performance: A front-load drain pump with a 120V, 85W AC motor (Askol M65 design), featuring a flapper to prevent drain backflow. Fixes symptoms like “won’t drain,” “noisy,” or “leaks.” Compatible with washer-dryer combos (e.g., FAFW3801LW3) and fits hundreds of models across Frigidaire brands.

Why Choose Genuine Frigidaire Parts?

Genuine Frigidaire parts, like the 137221600 Drain Pump, are engineered to meet the exact specifications of your appliance. Unlike generic or aftermarket parts, Frigidaire OEM components ensure:

• Perfect fit and function (e.g., precise 120V, flapper design for front-load models).

• Longevity and durability, tested for thousands of cycles.

• Manufacturer warranty support (typically 1 year, confirm with retailer).